Vintage/Classic/Used Gear
Amplifiers
For physical condition of equipment we use Audiogon's Grading Scale.
Vintage McIntosh MC 2120 Solid State Power Amplifier With Wood Case
Working Condition: Very Good 8/10.
All original. All functions operating very well. *Tested and DeoxIT cleaned.
Physical Condition: Very Good 8/10.
Perfect front face. No signs of damage, rust, corrosion, pitting and scuffs on chassis. Minor scratches and light wear for its age. Wood case has small chips on edges and one scratch on top.
*Cleaned, detailed and polished.
$3230.00 Can.
Specifications:
Power output:120 watts per channel into 8Ω(stereo),240 watts into 8Ω(mono)
Frequency response:10Hz to 100kHz
Total harmonic distortion: 0.1%
Input sensitivity: 0.75V
Signal to noise ratio: 95db
Manufactured: 1976-1982
Classic Antique Sound Laboratory AQ-1002 Power Tube Amplifier
Working Condition: Excellent 9/10.
All original. All functions operating very well.
Used 6550 tubes Quads,12AU7 tubes Quads.
*Tested, DeoxIT cleaned and Bias set.
Physical Condition: Good 7/10.
Minor nick and scratches on front face.
No signs of damage, rust, corrosion, pitting and scuffs on chassis. Minor scratches and light wear for it's age.
*Cleaned, detailed and polished.
$1590.00 Can.
Specifications:
Circuit Type:Push-Pull design
Power Output:50 watts rms per ch
1db response at 50watts:20-25,000Hz
Harmonic distortion:1%(at 3W)
Signal to noise ratio:-78db
Outputs (per/ch):4,8,16Ohm
Manufactured: 1999-2001
Vintage Dynaco Dynakit ST70 Power Tube Amplifier
Coming soon
Working Condition: Very good 8/10.
All functions operating very well.
*Tested, DeoxIT cleaned and Bias set.
Physical Condition: Good 7/10.
Missing lettering and small amount of pitting on front face. No signs of damage, rust, corrosion and pitting on chassis. Minor scuffs, scratches and average wear for its age.
*New PA060 Power Transformer.
*New wiring.
*Cleaned, detailed and polished.
Can be added for an additional cost:
New JJ EL34 tubes Matched Quads, JJ GZ34/5AR4 rectifier tube. Used 7199's
Call for pricing
Specifications:
Circuit Type: Push-Pull design
Power output: 35 watts per/ch
Frequency response: 20Hz to 20kHz
Manufactured: 1959-1977
Pre Amplifiers
Vintage McIntosh MX-112 Solid State Preamplifier Tuner
Working Condition: Good 7/10.
All functions operating well.
*Tested and DeoxIT cleaned.
Physical Condition: Very Good 8/10.
Perfect front face. No signs of damage, rust, corrosion and pitting on chassis.
Minor scuffs, scratches and average wear for it's age.
*New front glass and LED's.
*Cleaned, detailed and polished.
$1495.00 Can.
Specifications:
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.1%
Input sensitivity: 2mV (MM), 250mV (line)
Signal to noise ratio: 72dB (MM), 85dB (line)
Output: 2.5V Pre out, 10V Pre out Max
Manufactured: 1968-1971
Classic Antique Sound Laboratory AQ-2001DT Tube Preamplifier
Working Condition: Excellent 9/10.
All original. All functions operating very well.
*Tested and DeoxIT cleaned.
Physical Condition: Very Good 8/10.
Perfect front face. No signs of damage, rust, corrosion, pitting and scuffs on chassis. Minor scratches and very light wear for its age.
Used 5AR4 tube, 6V6 tube, 12AX7 tubes Trio, 12AU7 tubes Pair.
*Cleaned, detailed and polished.
$570.00 Can
Specifications :
Tubes: 5AR4 x 1, 6V6 x 1 ,12AX7 x 3 , 12AU7 x 2
Gain: 12
Maximum Output: 10V
Frequency Response(1V): 10Hz-100kHz
Frequency Response(Full Power): 12Hz-70kHz
Signal Noise Ratio(Noise Level mV): 85db / 0.5mV
Signal Noise Ratio(A weighted): 96db (0.05mV)
Input Impedance: 100K
Power Consumption: 36W
Manufactured: 2001
Speakers
Vintage Tannoy HPD 295/8 Speakers
Description:
Tannoy 10 inch Dual Concentric loadspeakers. Type (HPD 295/8) Monitor High Performance Dual (HPD) . In beautifully built walnut veneered cabinets. With Roll-Off and Level controls.
Working Condition: Excellent 9/10.
All functions and level controls operating very well.
*Tested.
Physical Condition: Very Good 8/10.
Perfect grills and surrounds. Crossover inductors, capacitors and resistors are in excellent condition. Speakers have no scuffs, minor scratches, nicks on veneer corners and light wear for their age.
*Recapped and new resistors.
*New level control.
*Refoamed surround.
*New grill cloths and pegs.
*Cleaned and waxed veneer.
$2390.00 Can
Specifications:
Type: 2 way, 1x dual concentric
Frequency Response: 45Hz to 20kHz
Power Handling: 60W
Crossover Frequency: 3500Hz
Impedance: 8Ω
Sensitivity: 90dB
Finish: American walnut
Manufactured: 1976-1978
Classic B&W CDM9NT Speakers
Description:
The CDM 9NT is the largest floorstander loud speaker in the range producing generous bass extension and delivering a tight midrange. The CDM 9NT incorporates the unique surroundless Kevlar midrange FST first pioneered in the 800 Series. Technological features include Nautilus tweeter, braced cabinet construction, Flowport, Bi-Wired capable and mushroom dust cap for improved bass throw. The handcrafted cabinets in real wood finishes incorporate the best in design know how.
Working Condition: Excellent 9/10.
All functions operating very well.
*Tested.
Physical Condition: Very Good 8/10.
Perfect grills and surrounds. Crossover inductors, capacitors and resistors are in very good condition. Unseen bottom has floor scraping in the veneer on one speaker. The rest of the speakers have no scuffs, very minor scratches and very light wear for their age.
*Cleaned and waxed veneer.
$1430.00 Can
Specifications:
Method: 3-Way, 4-Speaker, Bass Reflex System, Tall Boy Type
Units: For low band : 16.5 cm cone x2
For Medium Range : 15.0 cm Cone Type
For high-pass : 2.5 cm dome typePlayback frequency band30 Hz to 30 kHz -6dBPlayback frequency response38 Hz to 20 kHz ± 3 dBNominal impedance8 Ω (minimum 3.0 Ω)Sensitivity89dB/2.83V/mCrossover frequency350 Hz, 4 kHzPower Handling
(Amplifier Output)50W ~ 200W (at 8 Ω).
Finish: Cherry
Manufactured: 2000 - 2003
Classic Linn Katan Speakers
Description:
The Katan is a attractive, compact two way bass reflex bookshelf loudspeaker. Can be easily configured as passive, active and Bi-Wired.
Working Condition: Excellent 9/10.
All functions operating very well.
*Tested.
Physical Condition: Very Good 8/10.
Perfect grills and surrounds. Crossover inductors, capacitors and resistors are in very good condition. Front bottom corner and rear back has nick in the veneer on one speaker. The rest of the speakers have no scuffs, minor scratches and average wear for their age.
*Cleaned and waxed veneer.
$625.00 Can
Specifications:
Enclosure Type: 2 way ported
Recommended Amplifier: Minimum 30 Watts
Frequency Response: 75Hz - 20kHz
Sensitivity: 85dB
Nominal Impedance: 8 Ohms
Drivers: 1 x 19mm (0.75") dome tweeter
1 x 160mm (6.25") cone
Dimensions:170 x 340 x 230mm (Width x Height x Depth)
Weight:6kg / 13.2lbs
Finish: American Cherry
Manufactured: 2002